Beautiful hairstyles for long and medium hair with your own hands. Who is fit, how to do it. Step-by-step instructions with photos and videos

A neat fashionable hairstyle is the decoration of any woman. In the fast pace of modern life, there is not always enough time to visit a beauty salon. There is a solution: to learn to do the most suitable and fashionable hairstyles with your own hands at home.

Easy and quick options

Option 1

1. Hair should be washed, dried, apply foam (mousse).
2. Then the hair is massaged at the base with the fingertips in different directions, pulling the hair up a little.
3. With a round brush comb out each strand.
4. Lay hair on a parting, fix with a varnish.

Option 2

Hair well dried after shampooing is separated by a side parting. The strands curl with a medium diameter curling iron. The resulting curls need to be fixed with varnish.

Option 3

Spectacular and feminine hairstyle for long and medium length hair.

1. Hair needs to be washed, combed well.
2. Then spray on them for curly hair.
3. Wind the hair on curlers (choose the tool of the required diameter for the desired curl diameter). Keep curlers need 40 minutes.
4. The resulting curls are not combed, but immediately fixed with varnish.

Hairstyle Malvinka

The hairstyle became especially popular in the 90s, but now it does not lose its relevance and sophistication. It has the appearance of loose hair, the upper part of which is removed from the face and tied in a bun, ponytail. Do it yourself at home. It will take quite a bit of time to complete.

This is an easy option for everyday life. But with the use of decorative hairpins, flowers, hair bows, a festive version will turn out.

The hairstyle is done on straight and wavy curls. Moreover, it looks best on owners of hair of medium length and longer than average. Girls with a narrow face and sharp cheekbones need a pile, curled locks, and women with an oval (triangular) type of face will need a smooth hairstyle.

Malvinka, in which her hair is loose behind, and the locks in the front are matched – goes to everyone.

Tools: invisible, strong hold varnish, various combs, silicone rubber bands.

1. Hair should be washed, dried, combed out.
2. Then take a narrow lock from the top of the head, alternately comb, spray varnish. It should turn out a magnificent pile of hair.
3. Then they take a wide lock from the forehead, lift it, put it on a combed base, fasten it with invisibility, spray varnish.
4. Invisibles fasten back locks. Various decorative elements can be used.

Most girls collect part of their hair with an elastic band. This approach is not true – it gets tangled in the hair, because of which the styling becomes less beautiful, the curls break up. Classic styling requires inconspicuous studs, as a result, the locks are securely fixed, do not fall apart.

With fleece

To give volume and splendor it is not necessary to have thick hair. Easy Bouffant – Malvinka Lifehack. It is necessary to comb the hair on the top, fix with varnish, stab with invisible (elastic).

With harnesses

This hairstyle is suitable for everyday look:

1. If volume is needed, the hair should be curled, and the strands on the top of the hair should be combed a little.
2. Then divide the entire volume into strands 2 – 2’4 inch wide above and below the ears.
3. The resulting strands are divided into two parts.
4. Take a strip on each side, twist them into bundles, lead back, fasten.
5. Large harnesses look prettier.

At will decorate a hairdress with a decor.

With bow

Tools: comb, fixation spray, thin elastic, invisible.

Do-it-yourself hairstyle on clean hair at home:

1. From each side, they are separated in a wide lock, brought back, tie an elastic band.
2. The tail does not need to be straightened to the end; a loop of hair should be formed.
3. Then the beam is divided into two equal parts.
4. The bow formed “wings”. The size of the bow will depend on the thickness and length of the hair.
5. Each “wing” is attached to the hair with invisibility, retaining its shape.
6. A strand is separated from the remaining portion of the tail to form a jumper, and the middle is wrapped with it.
7. The jumper is pinned with studs. For the festive version, studs with beads and pearls are used.

With braids

Malvinka with a “French” braid looks more beautiful than a beam. It is weaved from the forehead and straightened for volume.

Option 1

1.  The hairs of the top of the head and the back of the head are combed.
2.  A pair of thin braids are braided at the temples.
3.  Fix them with invisible back.

Option 2

This option is universal. Subject to the correct creation of hairstyles, it persists throughout the day.

1. Take a side lock over the ear, dividing it into 3 parts. Braid the braid.
2. Do the same on the other side. Braids can be wide and small (optional).
3. Invisibles connect both braids on the back of the head.
4. For volume, lift the hair on the top of the head and fix with varnish.

Tail bundle

It is carried out using various techniques, has a different look.

A few tips for owners of curly hair:

1. Wash your hair before styling.
2. Be sure to use styling products.
3. In the process of creating a hairstyle, do not moisten the hair with water.

At home, with the help of a donut, a bundle is collected with their own hands, giving the image an elegance.

Hairdo is decorated with decorative hairpins, hairpins, ribbons.

Option 1

1. Carefully combed hair is gathered in a ponytail on the parietal.
2. The tail is fixed with an elastic band, combed, twisted with a tourniquet.
3. The elastic is wrapped around them, the tip is stabbed with studs, sprayed with varnish.

Option 2

1. The tail is assembled at the crown, bandaged with an elastic band of dense material.
2. A couple of strands are separated from the edges of the tail.
3. The middle part is fixed by invisibility from the inside, closer to the crown zone.
4. Braids are woven from extreme strands.
5. The pigtail located on the left is wrapped around the tail, fixed on the right side in the middle. Do the same with the pigtail on the right.
6. For volume you need to pull out the upper part a little.
7. It is possible to use decorative elements.

A bunch of curls

Option 1

1. Foam is applied to clean hair, well distributed with a comb along the entire length of the hair.
2. Tie a high tail.
3. A loop is formed without pulling the end of the tail from the last gum revolution.
4. A loop with a protruding tail tip is combed, giving it the effect of negligence.
5. Spray varnish on styling. Near the face they release a couple of locks.

Option 2

1. Make a horizontal parting at the crown.
2. A tail is tied from the bottom, which is wrapped inward, creating a bundle. Fixed with studs.
3. The upper part is curled with curls.
4. Take along a side lock, twist and stab them in the direction of the nape. The remaining curls wind around the circumference of the gulka, hiding the tip inward.

Bunch with braids

Option 1

1. The curls are combed out, divided into 3 equal parts. The central one is bandaged with an elastic band, a bun is made, and stabbed with invisibility.
2. Strands from the sides are plaited into braids.
3. Wrap the bundle with braids.
4. The ends of the braids are picked up, held together by invisibility.

Option 2

1. Stepping back from the temples 0’8 inch back, separated by the same strand. The remaining hair is collected at the back of the head.
2. Spikelet weave, form a knot. Left strands are woven last.
3. The bundle is wrapped oblique, the ends are cleaned inward.
4. Fasten the studs, spray varnish.

Option 3

1. Collect at the top of the tail from a mop of hair.
2. A thin strand is separated, a braid is woven from it.
3. Take a bagel and fasten the tip for it.
4. Turn the bagel up to get the babette.
5. Fasten with hairpins.
6. A scythe is wrapped around a babette, fixed with invisibles.

Option 4

1. Curls are combed back.
2. They begin to weave a braid of 3 strands, gradually weaving a loose strand. It will turn out a French spikelet.
3. They are woven to the occipital part, forming a tail from a lock.
4. The tip is curled with a curling iron. Curls climb into a bundle, fastened with hairpins.

Hairstyle for long hair with a tail and side weaving

Training:

1. To add volume to the tail, wash the hair, brush the ends of the hair with balsam, dry and comb.
2. Ironing with corrugation heated strands at the roots of the hair.
3. The ends are curled inward for 20 seconds.
4. Curls are taken from the back of the head to the face.

Option 1

1. Hair is divided side part from right to left, to the ear from the forehead.
2. On the left side, make a tail, tie it with an elastic band. Do not touch the bottom of the hair.
3. The remaining hair is braided into a braid, gradually adding strands on both sides. The end of the braid is tied with a second rubber band.
4. Untie the gum on the tail (which was at the beginning), comb the hair.
5. Untie the elastic at the end of the pigtail, it is attached to the rest of the hair.
6. They braid everything in one tail. Take a lock, wrap it with an elastic band. The ends are cleaned, stabbed with invisibles.

Option 2

1. Disassemble the hair with a side parting.
2. A braid is braided on one side. It needs to be slightly disheveled.
3. The mop is collected in the tail by pulling with an elastic band.
4. A strand of gum is wrapped around the tail.

Classic shell

Option 1

1. Comb your hair back and to the left.
2. Invisibly fasten hair in this position.
3. They take all the hair in their hands and twist it inward 2’8 inch to the end.
4. They stab with hairpins for invisibility.

The technique of performing shells on medium and long hair is the same.

On the average length of the hair it is more difficult to form a neat hairstyle, it is necessary to use means of fixation.

Option 2

1. The hair at the roots is combed.
2. Gather back into the tail. Do not tie a rubber band.
3. Spin the tail into a tourniquet.
4. Model a roller. The tip of the hair is removed under the roller.
5. Stab with studs.

Advice! For beginners, a twister will help make such a hairstyle with your own hands at home. 

An iron for hair alignment will provide a rigorous look and smoothness of forms. The bangs are curled with a curling iron and laid with curls on the top of the head.

Option 3

1. Strands comb, curl, comb on the top of the head.
2. Collect the tail, secure with an elastic band.
3. The tail is wrapped up, passing it under the elastic.
4. Wrap a bunch of them. Stab with studs.

Shell with braids

1. Hair combed to one side. The bangs are separated.
2. Part of the hair is collected over the left ear, divided into 3 parts, a unilateral French braid is braided. Weave freely and only from the upper strands.
3. The weave is placed just above the ear line, down diagonally. When weaving the braid reaches the other ear, weave down a classic braid, secure it with an elastic band.
4. When the weaving of the first braid came to an end, they weave the second of the upper strands under it . When the strands end, they braid an ordinary braid, fix with an elastic band.
5. Form a shell of two braids. Twist the lower braid in a spiral, fix it with a hairpin, hide the tip. The first braid is twisted around it in a circle.
6. Fix it with a hairpin, remove the tip.

Side rollers

Rollers for medium and long hair give volume, allowing you to adjust facial features. Side rollers hide the thickness of the cheeks, making the appearance sophisticated.

Option 1

1. The hair is combed, curled into a curling iron.
2. Separate the strand in the middle from the forehead to the crown.
3. Spray on it, comb it at the base, fix it with invisibility.
4. Separate the strand from the temple, twist the roller.
5. Fix it on the back of the head. On the other hand, they do the same.
6. With the rest of the hair they do the same. At the end, fix everything with varnish.

Option 2

1. Distribute the mousse through the hair.
2. Dry them, fluff with your fingers.
3. Make a parting. On one side and on the other hand, they take them in strands, twist them back with rollers, and attach them with invisible ones.
4. Collect all hair and lay in a bun. Pinned around, fixed with varnish.

High hairstyle with braid flowers

Hair moisturizes a little. The braid is braided tight to get an expressive flower.

Option 1

1. At the location of the flower, 3 strands are distinguished.
2. Weave an ordinary French braid. One side will be openwork.
3. Hold by the tail, pull out strands in the form of thin loops.
4. The braid is finished, tied with an elastic band. They are twisted in a spiral so that the openwork edge appears outside.
5. The flower is fixed with hairpins, decorated.

Option 2

1. Weave a French braid superficially in reverse technique in a zigzag or diagonal fashion.
2. Make a parting, braiding a braid from the side where there is more hair.
3. Grips and pulling loops do on both sides.
4. Weaving should be from the crown to the temple, then you need to turn and weave through the bottom in a semicircle to the other ear. Near the ear, the remaining hair is picked up, weaved to the end, tied with an elastic band.
5. Loops extend along the entire length.
6. The braid is twisted, forming a flower, stabbed with hairpins.

Option 3

1. A heat-protective spray is applied to clean hair.
2. Strands are ironed with an iron.
3. Hair is collected in 3 tails, each divided into several parts. Each strand is moistened with gel, rolled into a roller, fixed with an invisible.
4. A flower is formed, fixed with hairpins.

Double Waterfall weaving step by step

1. Strands curling with a diameter of 2. 2 inch, starting from the back of the head. Curl the whole head, gently comb the hair.
2. Weave the first braid, starting slightly above the right ear. It runs in an arc along the head, ending at the left ear. Performed in the technique of traditional French braids. Three strands are distinguished behind the right ear.
3. On the central strand lies first the left strand, then the right one.
4. Take a little hair from above, connect with an extreme lock, cross over the center.
5. Leave the right strand free, instead, take another strand from below, cross over the center.
6. Weaving continues similarly. They pick up the hair on the left side, cross it in the center, leaving the strand below free. Instead, separate another strand from the bottom, cross over the center. The upper strands are moderately pulled, creating the effect of an arc.
7. They braid the braid a little, bypassing the left ear, and fix it with an elastic band.
8. The second braid is weaved a few inch below the first. Grips from above are made from strands remaining free.

False bean on medium hair

The hairstyle creates the effect of a bob-haircut. Option for girls who do not want to cut their hair.

Of the tools for creating hairstyles at home, you need a comb, hairpins, hairpins, nail polish.

Option 1

1. With a horizontal parting, hair is divided in half.
2. The upper part is slightly combed, separated, fixed with a clip.
3. The lower part is combed, twisted into a tourniquet around its axis. Stacked on the back of the head, stabbed with hairpins.
4. Remove the clamp, do a pile. Lay ba
   ck, smooth with a brush.
5. Visually divide the upper part into large strands.
6. These strands and their ends are tucked inward, fixed with invisibility.
7. Straighten hair neatly. Spray with varnish.

Option 2

Front side locks do not tuck. Leave them full length.

Option 3

The upper zone is not bent. The ends of the strands are twisted with an iron up, while blowing them with a hairdryer.

Elegant tail

1. Separate the hair at the crown with a horizontal parting, fix it with a clip.
2. The lower part of the hair is tied in a ponytail. Remove the clamp, comb the free strand from the roots.
3. Let the hair down, slightly smooth. Rubber band connect both parts.
4. Gum is wrapped with one curl.
5. The tip is hidden, stabbing with an invisibility. The tail is fluffed.

Crossed tail

1. Separate hair into 3 parts.
2. The middle part is collected in the tail, fixed with an elastic band.
3. The lateral parts are divided into small locks, they are placed at the tail alternately crosswise – crosswise.
4. Each pair of strands is secured under the tail with invisibility.

Braid wreath: options for medium and long hair

Wreaths are best obtained on stale hair. Ideally – the third day after washing your hair. When weaving a wreath on clean hair, the mandatory use of a texturing spray is required.

Option 1

1. Divide the hair into the lower, middle, upper parts.
2. From the middle part weave through the crown of the head a French braid from left to right (to the right ear).
3. A braid is woven from the upper part at the forehead. From the bottom – the French braid from the left ear from left to right. It should make a wreath around the whole head.
4. Joints and tips are removed with studs. Fix with varnish.

Option 2

1. The hair is distributed on all sides, comb. Spray is applied from the middle of the length of the hair to the ends.
2. Divide hair into 2 identical parts.
3. On the left, starting from the ear to the ends of the hair, a classic braid is braided. Tied with an elastic band. On the right, they do the same.
4. The left braid is lifted up, laid on top of the head for the entire length. Fix with invisible. Manipulations with the right oblique are similar.
5. Braids for volume are slightly stretched to the sides. To create a romantic image, several locks are pulled out of the face.

Option 3

1. Comb hair. A strand 3’9 inch long is taken behind the ear to the right. Divided into 3 parts, weave a French or Dutch braid on the contrary.
2. The strands are selected in turn from two sides, carried out crosswise under the main part of the braid.
3. When weaving a wreath, symmetry is observed. When the wreath is ready, a free edge is braided into a long braid, the tip is tied with an elastic band, hidden.

On medium-length hair, a loose pigtail is hidden under weaving at first, fixed with invisible hair. From long braids make additional curls in the center of the wreath, fasten with invisible.

Tail weave

1. Hair combed, tied in a high tail.
2. Braid is braided from it, tied with a transparent elastic band.
3. Wrap around the tail. Fix with invisible.

Braid of 3 braids

1. Combed hair is divided into 3 parts.
2. 3 braids are braided.
3. Of the 3 braids, one braid is braided.

Harness braid

1. The tail is collected at the crown.
2. It is divided into 2 parts, twisted into bundles.
3. Tied with an elastic band, again twist 2 tows, connected with an elastic band.
4. Repeat at an equal interval.

Weaving “Snail”

1. Separate a small strand from the middle of the head.
2. Divide it into 3 equal in size.
3. Braid French braid with one grab on the right. First, take small strands so that there is enough hair for the subsequent circles.
4. Braid weave around the circumference of the head. The tip is decorated.

Spit “Scorpio”

Option for a beautiful do-it-yourself hairstyle on medium hair at home:

1. Gather hair in a ponytail on the back of the head. Divide it into 2 equal parts: upper and lower.
2. The upper part is divided into two. Both are combed. Take a comb with rare teeth and gently comb the comb.
3. Departing from the base of the tail 1’2 – 1’6 inch, tie a silicone rubber. The strand is placed horizontally on the head.
4. With the sharp end of the comb, pry the upper layer of hair between the elastic bands, and pull it up a bit, forming a roller.
5. Before you tie a second elastic band, the strand is divided into 3 strands. Two thin ones are separated on the sides (in the future they will be the paws of a scorpion). The central tie with an elastic band at a distance of 1’2 – 1’6 inch from the first elastic band. Form a roller.
6. The remaining free end of the strand is wrapped with a roller and fixed with hairpins, retreating from the hairline by 0’4 inch.
7. The end of the strand under the third roller is halved. Each is brought to the left and right of the head. In the middle of these strands tie elastic bands, spray varnish, forming paws.
8. Two strands from the second roller on each side curl into a curling iron. Disassemble each into 3. Carefully attach 2 strands of hairpins to the hair, giving the appearance of the legs of a scorpion. The third strand is in a free position.
9. It should turn out a “body” of 3 rollers, horizontally located on the head, and 4 paws on each side.
10. Take a decorative cord on a wire frame. The edge of the cord is bent 3’9 inch, folded in half, twisted around the axis 5 times. Thanks to this action, a dense base is created. Hair is pierced with the base from the beginning of the tail, moving horizontally to the middle of the second roller. Fasten the cord under the roller with studs.
11. The free end of the lace is connected to the lower strand of the tail. 3 elastic bands are tied with an interval of 1’2 – 1’6 inch, forming a “scorpion tail” (manipulations as with a right strand);
12. From the remaining end of the strand, the tip of the
    tail is made using varnish.
13. Raise the “scorpion tail” to the desired height, fix the cord at the base of the tail with hairpins. Curving the cord, give the desired shape to the hairstyle.

    

The number of rollers, the distance between them, depends on the length of the hair and the imagination of the performer. With a little practice, you can do such an interesting hairstyle with your own hands at home.

Everything is important in the created image: from choosing a wardrobe, makeup to a hairstyle, and since you can’t always turn to professionals for help, it’s important to learn how to do your own hairstyles. The main thing is to keep abreast of fashion trends, to learn about new products and styling details for women’s hairstyles from hairdressers and stylists. Then you can always remain stylish and unsurpassed.

Video about beautiful hairstyles at home

5 simple hairstyles for every day with your own hands:

Hairstyles for medium, long hair in 5 minutes for every day: